DeepCool MATREXX 55 MESH Airflow Case: A Build Planner's Guide from CSI
The DeepCool MATREXX 55 MESH Airflow Case (V4 C) is an ATX mid-tower that comes with four ARGB PWM fans already installed and a high-flow mesh front, so you can build a cool-running gaming or work PC without buying extra fans.
MATREXX 55 cases have been a long-time favourite of system builders. The V4 C revision keeps the familiar front LED strip along the right edge and makes the parts that matter more capable. The front now holds three 140mm fans instead of smaller ones. A USB Type-C port has been added to the top panel. The interior is sized for today's long graphics cards and 360mm AIO coolers. As the top IT products distributor in Bangladesh, CSI supplies this chassis through official channels, with brand warranty and after-sales support handled locally.
Will Your Parts Fit? A Quick Compatibility Check
Short answer: almost any mainstream build fits. The case takes ATX, Micro-ATX and Mini-ITX boards, graphics cards up to 370mm, air coolers up to 165mm tall and ATX power supplies up to 170mm long.
- Graphics card: Most triple-fan RTX 40/50-series and Radeon RX cards are within the 370mm limit. Check the length of extra-large flagship models before you order.
- CPU air cooler: The 165mm limit covers most dual-tower and single-tower coolers. A few very tall flagship towers exceed it, so check the cooler's height first.
- Liquid cooling: The front takes a 360mm radiator and the top takes up to 280mm, which leaves room for a large AIO.
- Power supply: Standard ATX units up to 170mm fit under the shroud. The drive cage can be removed if you need more room for a longer PSU or cable bundle.
- Storage: There are two 3.5" bays and up to three 2.5" positions, enough for a game library HDD and a couple of SATA SSDs alongside NVMe drives.
- Expansion: Seven PCIe slots handle a GPU plus capture, Wi-Fi or sound cards.
How Air Moves Through This Chassis
Cool air enters through the mesh front, the three 140mm fans push it across the GPU and CPU, and the 120mm rear fan exhausts the warm air. This is a front-to-back airflow path that keeps heat moving out of the case.
The mesh front is the key difference from the glass-front MATREXX 55 V4 C. A solid glass front restricts intake, while the perforated mesh lets the 140mm fans pull air in at lower RPM. Lower RPM usually means less noise for the same cooling. All four fans are PWM-controlled, so the motherboard can keep them slow and quiet on the desktop and speed them up during long gaming sessions or renders. The PSU shroud has mounting points for two more 120mm fans if you want extra airflow to the lower part of the case.
This matters in Bangladesh, where room temperatures in summer are often well above 30°C and many home offices aren't air-conditioned. A front-mesh, positive-pressure layout like this one copes with that environment better than closed-front designs.
Three Builds This Case Suits Well
1. Mid-Range Gaming Rig
This is the best fit: a Ryzen 5 or Core i5 with a mid-to-upper graphics card, cooled by the included fans and a tower air cooler. You don't need to buy any extra case fans, and the ARGB lighting sync gives you a coordinated look without separate controllers.
2. Liquid-Cooled Performance PC
Put a 360mm AIO in the front or a 280mm AIO on top to cool a Ryzen 7/9 or Core i7/i9. If you mount the radiator in front, the three stock 140mm fans will be replaced by the radiator's 120mm fans. You can reuse the 140mm fans on the top, where two 140mm positions are available.
3. Office or Creator Workstation
For editing, CAD or software development, the airflow keeps sustained CPU loads stable, and the lighting can be switched off. The ARGB button on the I/O panel cycles effects or turns the LEDs off, which works well in a professional setting.
Front Panel and Daily Use
The top I/O panel has one USB 3.0 Type-A port, one USB Type-C port, a combined audio jack and an ARGB lighting control button.
The Type-C port is useful in daily use for fast phone transfers, modern flash drives and portable SSDs without an adapter. The tempered glass side panel shows off your components, and the steel (SPCC) and ABS construction keeps the case at about 6.5kg, so one person can move it between a desk and a LAN event.
MATREXX 55 MESH vs a Panoramic Fishtank Case
Choose the MATREXX 55 MESH if airflow and ready-to-use cooling matter most. Choose a dual-glass panoramic case if your priority is showing off the build.
Some buyers compare this chassis with the DeepCool CG580 4F V2 Panoramic Glass Panels Single Chamber ATX Fishtank Case. The CG580 uses wraparound glass for an unobstructed view of RGB components and works best for display-focused builds. The MATREXX 55 MESH puts thermal performance first. Its full mesh front gives unobstructed intake, and its four fans arrive installed and ready. If your GPU runs hot or your room is warm, the mesh design is the more practical option. If you're building a showpiece and plan to add your own cooling, the panoramic case is the better choice.
Trade-Offs to Know Before You Buy
- The rear only takes a 120mm fan or radiator. This is typical for the class but limits rear exhaust upgrades.
- There is only one USB-A port on the front. If you plug in many USB-A devices, plan on a desk hub.
- The top radiator limit is 280mm. A 360mm AIO has to go in the front.
- The ARGB fans need a motherboard ARGB header or the case button. Older boards without 5V ARGB headers can still use the case's own lighting control.
None of these is a deal-breaker for most builds, but knowing them ahead of time helps you choose the rest of your parts.
Get this Product from CSI
CSI is Bangladesh's top IT products distributor, supplying official DeepCool hardware with brand warranty, local service support and secure nationwide delivery.
- Official supply chain: Stock comes directly through authorized distribution, so it isn't grey-market and warranty coverage is clear.
- Local warranty handling: Warranty claims are processed in Bangladesh, so you don't have to deal with overseas returns.
- Build advice: The CSI team can help check compatibility with your motherboard, GPU and cooler before you buy.
- Protected delivery: Cases are packed to protect the tempered glass during transport across the country.
Browse the full computer casing collection at CSI, compare other models in the DeepCool computer case range, or see all DeepCool PC components and cooling products available from CSI.
Frequently Asked Questions
What is the difference between MATREXX 55 MESH V4 C and MATREXX 55 V4 C?
The two versions share the same chassis, fans and I/O. The MESH V4 C has a perforated mesh front for stronger airflow, while the standard V4 C has a tempered glass front for looks. The mesh version is also slightly lighter at 6.5kg.
How many fans come with the DeepCool MATREXX 55 MESH Airflow Case?
Four fans are pre-installed: three 140mm ARGB PWM fans in the front and one 120mm ARGB PWM fan at the rear.
Can I install a 360mm AIO liquid cooler in this case?
Yes. A 360mm radiator fits in the front. The top supports radiators up to 280mm, and the rear supports a 120mm radiator.
Is the DeepCool MATREXX 55 MESH good for hot climates like Bangladesh?
Yes. The full mesh front and three 140mm intake fans move a large volume of air, which helps keep component temperatures steady in warm, non-air-conditioned rooms.
Where can I buy the DeepCool MATREXX 55 MESH V4 C in Bangladesh with warranty?
You can buy it from CSI, the top IT products distributor in Bangladesh. CSI supplies official DeepCool products with brand warranty, local after-sales support and secure nationwide delivery.
