LIAN LI GA II LITE 360 AIO Liquid Cooler: Best Price at CSI
The LIAN LI GA II LITE 360 AIO Liquid Cooler is a 360mm all-in-one CPU liquid cooler for people who want serious thermal headroom and clean ARGB styling without paying extra for a pump-head LCD screen.
Lian Li built the GA II series around one idea: strong cooling inside a case that also looks good. The "Lite" model keeps the parts that control temperature, such as the 3800 RPM pump, the triple-fan aluminum radiator and the hydraulic-bearing fans. It leaves out the display found on the LCD versions. For most gamers and creators in Bangladesh, that trade makes sense. You pay for cooling, not for a screen you may stop noticing after a week.
CSI, the top IT products distributor in Bangladesh, brings this cooler to builders through its official product channel, with local warranty handling and after-sales support from a team that knows PC hardware.
Who Should Buy This Cooler (and Who Can Skip It)
Buy it if your CPU runs hot under long loads. Skip it if you run a low-power office chip or your case cannot mount a 360mm radiator.
A strong match for
- High-end gaming rigs using Intel Core Ultra (LGA 1851), 12th to 14th Gen Core (LGA 1700) or AMD Ryzen 7000/9000 (AM5) processors that boost aggressively.
- Video editors, 3D artists and streamers whose renders, exports and encodes hold the CPU at full load for minutes or hours.
- Builders in Dhaka's warm, humid climate, where room temperatures cut into the cooling headroom of small air coolers during summer.
- Glass-panel showcase builds where a tidy pump head and ARGB glow matter as much as temperatures.
- AM4 upgraders who want a cooler that moves with them to AM5 later.
Probably not for you if
- Your processor is a 65W chip used for browsing and office work. A good tower air cooler is enough.
- Your case only fits 240mm or 280mm radiators. Check radiator support before ordering.
- You specifically want a live temperature readout or custom GIFs on the pump head. In that case, look at an LCD model instead.
Fit-Check Before You Order
Your case needs a 360mm radiator mount with room for about 397mm of length and roughly 55mm of combined radiator-plus-fan thickness.
Most returns of 360mm AIO coolers come from case fit, not the cooler. Spend two minutes on this checklist:
- Radiator length: The aluminum radiator measures 397 x 120 x 27mm. Your case manual should list "360mm radiator support" at the top or front.
- Total thickness: The 27mm radiator plus the 28mm fans comes to about 55mm. At a top mount, compare this against motherboard VRM heatsinks and tall RAM.
- Tube reach: The 400mm tubes reach comfortably from a front or top mount to the CPU in mid-tower and full-tower cases.
- Socket: Supported platforms are Intel LGA 1851 and LGA 1700, and AMD AM5 and AM4.
- Headers: Plan for a CPU fan or AIO pump header plus an ARGB header on your motherboard for lighting control.
What the Hardware Actually Does for You
A fast pump, a large radiator and high-pressure fans work together to pull heat from the CPU and release it quietly.
3800 RPM pump: why the number matters
The pump pushes coolant across the cold plate and through the radiator. A 3800 RPM pump keeps coolant moving quickly, so heat leaves the CPU before it builds up during sudden boost spikes. That matters on modern chips that jump to peak clocks in milliseconds when a game loads a new area or an export begins.
Fans tuned for radiators, not just airflow
Each of the three 120mm fans spins from 300 to 2500 RPM. Airflow figures (up to 79 CFM) get the attention, but the 5.1 mmH2O static pressure is the more useful number for an AIO. Radiator fins are dense, and pressure is what forces air through them. The wide speed range lets the fans stay near silent at idle and ramp hard only when the CPU asks for it.
Hydraulic bearings for long service life
Hydraulic bearings reduce friction and wobble over time. In practice, that means less bearing noise as the cooler ages, which suits a product with long warranty coverage.
ARGB pump head with rotatable logo
The pump head features customizable ARGB lighting, and the logo rotates so it sits upright whether the motherboard is mounted normally or the case uses an unusual layout. It is a small detail, but anyone who has installed an AIO with a sideways logo will appreciate it.
Lite vs. LCD: An Honest Comparison
The Lite and LCD versions share the same cooling formula. The main difference is that the LCD versions add a display on the pump head.
If you want a screen showing CPU temperature, system stats or your own artwork, a display-equipped cooler such as the LIAN LI HydroShift LCD 360R BK ARGB AIO Liquid Cooler is worth a look. If temperatures and lighting are what you care about, the GA II Lite gives you the core performance with a simpler setup and fewer things to configure.
A practical rule from experience: choose the LCD when the pump head is a visual centerpiece behind a glass panel. Choose the Lite when your build is about clocks, quiet operation and a clean RGB theme.
Installation Notes from a Builder's Perspective
Mount the radiator first, install the pump head second, and connect cables last.
- Top mount is the safest choice for most cases. It keeps the pump below the radiator's highest point, so air bubbles collect in the radiator rather than the pump.
- Front mount with tubes down works well too and often gives the GPU cooler air. Avoid placing the pump as the highest point in the loop.
- Check the cold plate for a protective film and remove it before installation.
- Set a fan curve in your BIOS. Let the fans stay slow below about 50°C CPU temperature and ramp only during heavy loads. That is how you get a quiet desktop and cool temperatures together.
- Direct fan airflow consistently. Most builders exhaust through a top radiator and use the front as intake.
Why Buy the GA II Lite 360 from CSI
CSI supplies authentic Lian Li hardware with local warranty support, a dedicated service center and safe delivery across Bangladesh.
- 6-year warranty, handled locally. Claims go through the CSI service center, so you are not stuck dealing with an overseas seller.
- Official sourcing. Every unit comes through CSI's distribution network, so you get factory-sealed, brand-backed stock rather than grey-market imports.
- Advice before you pay. CSI's sales team can confirm case fit, socket compatibility and stock availability before you order.
- Careful delivery. Radiators and tubes are packed to arrive undamaged, whether you are in Dhaka or outside it.
- Corporate and bulk support. System integrators and gaming cafés can work with CSI's corporate desk for volume orders.
Explore the full AIO liquid cooler collection at CSI, compare models in the Lian Li liquid cooler range, or browse more cases, power supplies and cooling hardware from the Lian Li brand store.
Frequently Asked Questions
Is the LIAN LI GA II LITE 360 compatible with Intel Core Ultra processors?
Yes. It supports the Intel LGA 1851 socket used by Core Ultra 200S desktop processors, as well as LGA 1700 for 12th, 13th and 14th Gen Intel Core CPUs.
Does the LIAN LI GA II LITE 360 support AMD AM5 and AM4?
Yes. It works with AMD AM5 for Ryzen 7000 and 9000 series and AM4 for earlier Ryzen processors, which makes it a good choice if you plan to upgrade platforms later.
Is a 360mm AIO better than an air cooler for gaming?
For high-end CPUs that boost hard, a 360mm AIO usually holds lower temperatures under sustained load and keeps fan noise more consistent. For mid-range processors, a quality air cooler can be enough.
How long is the warranty on the LIAN LI GA II LITE 360 at CSI?
The cooler includes a 6-year warranty, and CSI handles warranty claims locally through its service center in Bangladesh.
Does the AIO need maintenance or refilling?
No. It is a sealed, closed-loop cooler. Dust the radiator and fans every few months, and keep the pump from being the highest point in the loop.
